Laboratory Incubator

Product Details:

Body made of thick Stainless sheet 304 quality. Top lid is made of transparent see through plexi glass. Variable speed rotary shaker platform is fitted with imported DC driven motor for continuous operation. Unit is also fitted with digital RPM/Speed indicator. Shaking platform can accommodate 16 flask of 250 / 500ml or 25 flask or 100ml or 36 flask of 50ml provided at the base of incubator so as to shake Erlenmeyer flasks. Variable speed motor is fitted outside of the inner chamber at the base. Complete unit is mounted on a sturdy angle iron frame. Temperature range from ambient to 70°C is controlled by Digital Temperature Indicator cum controller with an accuracy of 0.5°C. Provided fitted with air circulation fan for temperature uniformity.

Additional Information:

• Delivery Time: 15-20 days

Product Details:

Double walled, inner made of Stainless Steel 304 quality, outer made of thick best quality Mild Steel the surface of which is primer coated for anti rusting and is duly white stoved powder coated paint. Insulation between inner and outer wall is done with 75mm thick glasswool to prevent any heat loss. Inner chamber is provided with 2/3 nos. perforated stainless steel shelves with ribs to adjust the shelves at desirable height. Provided with double door, inner made of thick transparent full view glass and outer door is double walled metallic properly insulated with glass wool and also provided with best quality handle, gasket, lock etc.

Provided with door operated illumination lamp. Whole unit is mounted on castor wheels. Temp. Range is from 5°C to 60°C and is controlled by Electronically controlled by Microprocessor PID Controller. cum Controller with PT-100 sensor. This controller is provided with time delay relay to control the accuracy in maintaining the temperature. Temp. is maintained with an accuracy of + 0.5°C. Cooling is done with ISI Mark compressor of KIRLOSKAR make which is connected to thick copper coils placed in the rear of the chamber through condenser, fan motor, capacitor, relay etc.

Whole cooling unit is placed below the main chamber in a GI housing. CFC Free, Environment friendly. Heating is done with ISI mark strip type heaters placed near the cooling coils.Air is circulated by 2-nos. ISI mark Silicon binded motors, which are connected to balanced blowers, which operates alternatively and continuously with heating and cooling. Provided with On/Off switch, Indicators, Digital Controllers etc.

Specification:

Additional Information:

• Delivery Time: 15-20 days

Product Details:

These are sturdy double walled units with outer chamber made of M.S. sheet duly powder coated / Painted inner made up of anodized aluminum or SS sheet. The gap between inner and outer chamber is filled with high grade glass wool to avoid thermal losses. Beaded heating elements are placed in ribs, at bottom and sides. Inner chamber is provided with ribs for adjusting perforated selves to convenient height.

The door is fitted with glass viewing window to facilitate inspection of sample without disturbing the test temperature. Temperature is controlled by Microprocessor PID Controller and its range from ambient to 90°C ± 0.5°C. An L- shaped prismatic thermometer is fitted to unit for reading the chamber temperature. Air ventilators are also provided on the sides of unit. To work on 220/230 volts A.C. Supply.

Specification:

Additional Information:

• Delivery Time: 15-20 days